iOS15/16/17/18越狱教程用到的工具为palra1n ，该工具支持使用Sileo商店并安装插件。
Palera1n supported models
| iPhone | iPad | iPod (loanword) | Apple TV |
|---|---|---|---|
| iPhone 6s | iPad mini 4 | iPod Touch (7th generation) | Apple TV HD |
| iPhone 6s Plus | iPad (5th generation) | Apple TV 4K (first generation) | |
| iPhone SE (2016) | iPad (6th generation) | ||
| iPhone 7 | iPad (7th generation) | ||
| iPhone 7 Plus | iPad Pro (9.7-inch) | ||
| iPhone 8 | iPad Pro (12.9-inch) (first generation) | ||
| iPhone 8 Plus | iPad Pro (10.5-inch) | ||
| iPhone X | iPad Pro (12.9-inch) (2nd generation) | ||
| iPad Air 2 |
可以添加对其他 arm64 Darwin 设备的支持，包括 Apple TV、HomePod 和 Darwin 21 及更高版本上的 iBridge，但目前不受支持。
永远不会支持 arm64e 设备。
Q: What versions are supported?
A: Among the above supported models, iOS15.0 - 15.8.5 , iOS16.0 - 16.7.12 , iOS17.0 - 17.7.10 , iOS18.0 - 18.7.1 are supported.
A11设备在使用前需要关闭锁屏密码，如果你是A11机型并且升级到了iOS16系统版本，并且您之前设置过锁屏密码，那您请在抹除所有内容和数据之后再开始越狱。
本文将有macOS、Linux、Windows三种操作系统的操作方法。
macOS & Linux & Windows
Install palera1n
- Open a terminal window and
cd转到 palera1n 下载到的目录。 - (of a computer) run
sudo mkdir /usr/local/bin- If you receive a message saying
mkdir: /usr/local/bin: File existsPlease ignore it.
- If you receive a message saying
- (of a computer) run
sudo mv . /palera1n-macos-universal /usr/local/bin/palera1n- interchangeability
. /palera1n-macos-universalFor any version you download
- interchangeability
- (of a computer) run
sudo xattr -c /usr/local/bin/palera1n - (of a computer) run
sudo chmod +x /usr/local/bin/palera1n
Run Palera1n
Please use the USB-A to Lightning connector cable, not the USB-C to Lightning connector cable.
If you are using an Apple Silicon Mac and plugged the cable/adapter in using the USB-C port, you will need to unplug and re-plug the device after the Checkmate! log appears.
创建FakeFS/BindFS
- (of a computer) run
palera1n <参数值>- 请注意16GB 存储空间的设备应该使用
palera1n -B -f，您需要有 2-3GB 的可用存储空间。 - 可用存储空间超过 2-3GB 但可用存储空间少于 10-15GB 的设备也可以使用
palera1n -B -f，但前提是它们在 iOS 15 上。 - iOS 16 或有超过 10-15GB 可用存储空间的设备应该使用
palera1n -c -f - Make sure your device is plugged in when you enter this command.
- 请注意16GB 存储空间的设备应该使用
如果您的设备：
在 iOS 15 上并且没有至少 2-3GB 的可用存储空间
在 iOS 16 上并且没有至少 10-15GB 的可用存储空间
您将无法继续遵循本教程操作。
在 iOS 15 上并且没有至少 2-3GB 的可用存储空间
在 iOS 16 上并且没有至少 10-15GB 的可用存储空间
您将无法继续遵循本教程操作。
- When ready, press
Enterand follow the on-screen instructions to enter DFU mode.
您的设备应该开始创建 FakeFS 或 BindFS（取决于您上一步运行的命令）需要5分钟～20分钟或更久，耐心等待完成。
- 一旦你的设备完成创建 FakeFS 或 BindFS，运行
palera1n-f
There is an issue with A9(X) and earlier devices where they get stuck halfway through this process in pongoOS. To resolve this issue, you need to do the following:
In the terminal window, press the keyboard
In the terminal window, press the keyboard
Control+CRerun the command you just ran, you will also need to do this each time you re-jailbreak your device.If you try to use some kind of virtual machine software for Windows (e.g. Virtualbox, VMWare, Windows Subsystem for Linux, etc.), you will not be able to follow this guide.
If you are using a computer with an AMD Ryzen CPU, you may experience problems.
If you do encounter problems, you should follow this guide using a Mac or a computer with an Intel CPU.
If you do encounter problems, you should follow this guide using a Mac or a computer with an Intel CPU.
Installation of Palera1n
- Open a terminal window
- (of a computer) run
sudo systemctl stop usbmuxd - (of a computer) run
sudo usbmuxd -f -p - Open a new terminal window and
cd进入 palera1n 的目录。 - (of a computer) run
sudo mv . /palera1n-linux-* /usr/bin/palera1n - (of a computer) run
sudo chmod +x /usr/bin/palera1n
Run Palera1n
If you are using a USB-C to Lightning cable to perform this procedure, you may experience problems entering DFU mode
If you do have a problem, purchase a USB-A to Lightning cable and, if necessary, a USB-C to USB-A adapter.
If you do have a problem, purchase a USB-A to Lightning cable and, if necessary, a USB-C to USB-A adapter.
创建FakeFS/BindFS
- (of a computer) run
sudo palera1n <参数值>- 请注意16GB存储空间的设备应该使用
sudo palera1n -B -f，您需要有 2-3GB 的可用存储空间。 - 可用存储空间超过 2-3GB 但可用存储空间少于 10-15GB 的设备也可以使用
sudo palera1n -B -f，但前提是它们在 iOS 15 上运行。 - iOS 16 或有超过 10-15GB 可用存储空间的设备应该使用
sudo palera1n -c -f - Make sure your device is plugged in when you enter this command.
- 请注意16GB存储空间的设备应该使用
如果您的设备：
在 iOS 15 上并且没有至少 2-3GB 的可用存储空间
在 iOS 16 上并且没有至少 10-15GB 的可用存储空间
您将无法继续遵循本教程操作。
在 iOS 15 上并且没有至少 2-3GB 的可用存储空间
在 iOS 16 上并且没有至少 10-15GB 的可用存储空间
您将无法继续遵循本教程操作。
- When ready, press
Enterand follow the on-screen instructions to enter DFU mode.
您的设备应该开始创建 FakeFS 或 BindFS（取决于您运行的命令），需要5分钟～20分钟或更久，耐心等待完成。
- 一旦你的设备完成创建 FakeFS 或 BindFS，运行
sudo palera1n -f
There is an issue with A9(X) and earlier devices where they get stuck halfway through this process in pongoOS. To resolve this issue, you need to do the following:
In the terminal window, press the keyboard
In the terminal window, press the keyboard
Control+CRerun the command you just ran, you will also need to do this each time you re-jailbreak your device.If you try to use some kind of virtual machine software for Windows (e.g. Virtualbox, VMWare, Windows Subsystem for Linux, etc.), you will not be able to follow this guide.
If you are using a computer with an AMD Ryzen CPU, you may experience problems.
If you do encounter problems, you should follow this guide using a Mac or a computer with an Intel CPU.
If you do encounter problems, you should follow this guide using a Mac or a computer with an Intel CPU.
request
- A 64MB or larger USB drive
- If you don't have a USB drive, but have another form of supported removable bootable hardware (such as a CD or DVD), you can use it instead of a USB drive
- Latest version of palen1x
- Ventoy
Installing Ventoy
- Download Ventoy to your computer
- Insert your USB drive (if you haven't already done so) and start the
Ventoy2Disk.exefile - Select the USB drive you have inserted
- Existing data on this USB drive will be completely erased.
- Ensure that all important data is backed up beforehand
- Click Install and confirm to erase the USB drive.
- Do not remove your USB drive until the process is complete!
- Once the installation is complete, copy the downloaded palen1x iso file to a USB drive.
Starting Palen1x
- Reboot, then go to your BIOS setup and disable Secure Boot, then go to the boot selector and select the USB drive from which you want to boot
- Every computer is different.
- If you're not sure, search for your PC or motherboard brand to learn how to enter BIOS setup
- When you see the Ventoy screen, press Enter to boot into palen1x.
Run Palera1n
If you are using a USB-C to Lightning cable to perform this procedure, you may experience problems entering DFU mode
If you do have a problem, purchase a USB-A to Lightning cable and, if necessary, a USB-C to USB-A adapter.
If you do have a problem, purchase a USB-A to Lightning cable and, if necessary, a USB-C to USB-A adapter.
创建 FakeFS/BindFS
- After loading palen1x, select
palera1n - 在新版本中选择
3 Switch> 选中Rootful> 按方向键右键选中OK> Enter回车 >Options> 按空格选中Create FakeFS - 根据您的设备容量、可用存储空间容量和 iOS 版本，按空格键启用两个选项之一：
- 16GB 设备应在Options中启用
Create BindFS，您需要有 2-3GB 的可用存储空间。 - 可用存储空间超过 2-3GB 但可用存储空间少于 10-15GB 的设备也可以启用
Create BindFS，但前提是它们在 iOS 15 上。 - 装有 iOS 16 或有超过 10-15GB 可用存储空间的设备应该启用
Create FakeFS
- 16GB 设备应在Options中启用
如果您的设备：
在 iOS 15 上并且没有至少 2-3GB 的可用存储空间
在 iOS 16 上并且没有至少 10-15GB 的可用存储空间
您将无法继续遵循本教程操作。
在 iOS 15 上并且没有至少 2-3GB 的可用存储空间
在 iOS 16 上并且没有至少 10-15GB 的可用存储空间
您将无法继续遵循本教程操作。
- check or refer to
Enter保存您刚刚选择的选项，然后选择Start- Make sure your device is plugged in when performing this operation.
- Follow the on-screen instructions to enter DFU mode.
您的设备应该创建 FakeFS 或 BindFS（取决于您选择的选项）。
There is an issue with A9(X) and earlier devices where they get stuck halfway through this process in pongoOS. To resolve this issue, you need to do the following:
In the terminal window, press the keyboard
Type exit
重新执行上一步操作
In the terminal window, press the keyboard
Control+C Type exit
重新执行上一步操作
Run Palera1n
- iPhone开机后，按回车键
- 再次加载 palen1x 菜单后，重新选择
palera1n - go into
Options按空格两次取消选中Create BindFSCreate FakeFS>回车一次 - option
Start- Make sure your device is plugged in when performing this operation.
- Follow the on-screen instructions to enter DFU mode.
您的设备现在应该开始越狱了。
设备启动后，打开 palera1n 加载程序应用程序并点击Install/Sileo。一段时间后，系统会提示您重启Spring或Close点击后Sileo应该出现在您的主屏幕上。
MacOS 和 Linux 要重新越狱您的设备，无论您在上面运行什么命令，只需运行
Windows版重新越狱您的设备，需要在
palera1n-f然后重复任何其他适用的步骤即可。Windows版重新越狱您的设备，需要在
3 Switch > 选中Rootful > 按方向键右键选中OK > Enter回车后选择Start开始操作。THE END
