Many friends try the Apple device to meet the checkra1n jailbreak requirements, but can not meet the conditions of the computer, so today to give you a use of Android phones to run checkra1n to the Apple iPhone, ipad, appleTV jailbreak tutorials, support for the system version iOS12-iOS12.5, iOS13-iOS13.7, iOS14-iOS14.4, it can be said that from iOS12-latest version are supported, the premise is that your device must be iOS13.7, iOS14-iOS14.4. .1, iOS13-iOS13.7, iOS14-iOS14.4, it can be said that from iOS12-latest version are supported, provided that your device must be iPhone5S-iPhoneX, not Many people can use this tutorial, but the jailbreak tutorial is still very detailed, this tutorial is only up to the Android device to start the Checkra1n jailbreak tool normally, it is also considered quite a complete tutorial, so let's start! Inside the tutorialTermux,Fx File Explorer,Droid infoTools can be followed xra1n public number reply to An excellent jail to get the download link

Jailbreak conditions:

• 1. Your device supports checkra1n jailbreak: A7-A11/iPhone5S-iPhoneX
• 2. Unlock Android Device BL Lock
• 3.ROOT/TWRP/Magisk
• 4.OTG Adapter
• 5.Lightning cable

Android device jailbreak Apple device tutorial (I)

Jailbreak with ROOT/Magisk privileges

1. Check your Android device's CPU architecture

We install DROID INFO and open it after installation to find the following information:

• CPU architecture
• instruction set

ARM for ARMv7 or armeabi

ARM64 means AArch64 or arm64.

x86 for x86 or x86abi

2. Download checkra1n

Download the version of checkra1n that corresponds to the CPU architecture of the Android device

3.Download Termux

4.downloadingFx File Explorer

We will need a file explorer to access the Android file with root user access. We will need this file to transfer the Checkra1n file downloaded in step 2. The transfer is needed so that Termux can find the Checkra1n file when sending commands to Jailbreak.

5. Transmission checkra1n

In this step, we will transfer the checkra1n binary to a specific folder so that Termux can find it.

After installing Fx File Explorer, open it up and set it up. Set it to the free version as the Pro version is not required for this process.
Once the setup is complete, enable root privileges to move the checkra1n file to the system partition to use it in termux.

Simply follow the steps below:

• Open Fx File Explorer
• On the main home screen, tap the menu icon in the upper left.
• Go to Settings
• Scroll down until you see the Developer option.
• Select it. A new warning screen will appear.
• Check the I understand the risk box and click OK to confirm.
• Click the back arrow to return.
• Now go to the folder where you downloaded your checkra1n file. Most likely it will be in the DOWNLOAD folder. Long press on it and select the "Copy" option from the top.

Now, tap the back arrow keys to go all the way back to the home screen. Then go to the System Root Directory section. It will ask for authorization, so click OK and then click Grant Superuser permission.

Now, click on the three-dot vertical menu in the upper right corner. Select Go to Path. And paste the following location:
/data/data/com.termux/files/home Now click on the clipboard option in the top right corner and click on Paste to transfer the Checkra1n file here.

You can now close Fx File Explorer and proceed to the next step.

6.Granting SU privileges

Now open Termux and type the following command

su //get permission

You will be prompted to grant superuser privileges. Click Grant.

7. iPhone enters DFU mode

You must know the difference between recovery mode and dfu mode for this step. In Recovery Mode, you will see a screen with wires and a laptop screen (old version of iTunes logo), while in DFU Mode, the screen is all black!

How to enter DFU mode on iPhone/iPad?

This method is different for different devices, so please proceed from one of the following three methods

iPad, iPhone 6s and below, iPhone SE and iPod touch

• Connect your iPhone to a power source (charger, laptop, mobile power).
• Press the Home button and the Lock button at the same time.
• After 8 seconds, release the "Lock" button while continuing to hold down the "Home" button. 
• If the Apple logo appears, the Lock button has been pressed for too long.
• When the device is in DFU mode, nothing will be displayed on the screen. If it is turned on, iTunes will warn you that the device is detected in recovery mode. 
• If your device displays a screen prompting you to connect your device to iTunes, retry these steps.

iPhone 7 and iPhone 7 Plus

• Connect your iPhone to a power source (charger, laptop, mobile power).
• Press the Side button and the Volume Down button at the same time.
• After 8 seconds, release the "Side" button while continuing to hold down the "Volume Down" button. 
• If the Apple logo appears, the Side button has been pressed too long.
• When the device is in DFU mode, nothing will be displayed on the screen. If it is turned on, iTunes will warn you that the device is detected in recovery mode. 
• If your device displays a screen prompting you to connect your device to iTunes, retry these steps.

iPhone 7 and iPhone 7 Plus

• Connect your iPhone to a power source (charger, laptop, mobile power).
• Press the Side button and the Volume Down button at the same time.
• After 8 seconds, release the "Side" button while continuing to hold down the "Volume Down" button. 
• If the Apple logo appears, the Side button has been pressed too long.
• When the device is in DFU mode, nothing will be displayed on the screen. If it is turned on, iTunes will warn you that the device is detected in recovery mode. 
• If your device displays a screen prompting you to connect your device to iTunes, retry these steps.

iPhone 8, Plus, X and iPhone 11, xs series

• Connect your iPhone to a power source (charger, laptop, mobile power).
• Quickly press the Volume Up button
• Quickly press the Volume Down button
• Press and hold the Side button until the screen goes black, then press and hold the Side button and the Volume Down button at the same time.
• After 5 seconds, release the "Side" button while continuing to hold down the "Volume Down" button. 
• If the Apple logo appears, the Side button has been pressed too long.
• When the device is in DFU mode, nothing will be displayed on the screen. If it is turned on, iTunes will warn you that the device is detected in recovery mode. 
• If your device displays a screen prompting you to connect your device to iTunes, retry these steps.

How to exit DFU mode on iPhone?

To exit DFU mode, simply force a reboot of the device.

• For iPad, iPhone 6s and lower, iPhone SE and iPod touch:Press and hold the Home button and Lock button until the device reboots.
• For iPhone 7 and iPhone 7 Plus: Press and hold the Side button and the Turn Down Volume button until the unit restarts.
• For iPhone 8, iPhone 8 Plus, iPhone X and iPhone 11, xs series: Quickly press the Volume Up button, then quickly press the Volume Down button, then press and hold the Side button until the unit reboots.

8. iPhone connects to Android devices

Now, make sure your device is in DFU mode then:

Connect the OTG adapter to the Android device and use the Lightning cable to connect the iPhone to the android device.

9. Run checkra1n in the terminal.

Open termux on your Android device and make sure you have granted SuperUser permissions to it from step 6.

Now type the following command:

lsusb //View USB

This command will check to make sure that your iPhone and Android devices can communicate properly with each other. If they have successfully connected, then you should see something like USB ID " 05ac:1227". If the device ID matches, then you are ready to execute the jailbreak command in the next step. If not, then you may have to repeat the first two steps and retry.

This time makes the checkra1n file executable if the device is connected correctly.

Type or paste the following command to make the Checkra1n file executable.

chmod +x checkra1n //execute permissions

This command will make our Checkra1n executable.

10.Run CHECKRA1N

Run the following command to execute the checkra1n file.

. /checkra1n -c //execute checkra1n

The Apple logo will appear on your device, after which the jailbreak will begin and you will be taken to the jailbroken system when the jailbreak is complete.

11. Install Cydia

Now for the final step of installing Cydia. After powering on your device, follow the steps below to install Cydia.

• Enter your lock screen password.
• After that, you will see the checkra1n icon on the home screen.
• Make sure you are connected to the Internet.
• Open Chekra1n.
• Click Cydia.
• Click Install Cydia.
• It will then download and install Cydia.
• After that, tap on the cydia icon on your home screen to open Cydia and start installing tweaks.

Android device jailbreak Apple device tutorial (II)

TWRP Jailbreak Apple Devices

1. Unlock Android BL

Let's take Xiaomi phone as an example, after downloading the unlocking tool from Xiaomi's official website, we log in to Xiaomi unlocking tool with the ID of our Android device to start unlocking it:

2. Brush in TWRP

Download the corresponding TWRP for your Android model online and start flashing it.

3. Download checkra1n

4. Reboot into Recovery

Take Xiaomi as the method to enter Recovery is Power + Volume Up key

5. checkra1n moved to /system

We copy/move the downloaded checkra1n file to the /system directory

• 

• 

6. Run checkra1n in the terminal.

Let's go to the terminal and type the following command to run the checkra1n jailbreak tool

cd /system //enter the /system directory
chmod 777 checkra1n //give checkra1n highest privileges
. /checkra1n -c //run checkra1n

7. Plug in your iPhone device

Plug in your iPhone and enter recovery mode, after that enter DFU mode again after checkra1n program will automatically start jailbreaking, if it reports an error or fails to re-execute:

. /checkra1n-c

This article is copyrighted by BLOG.6ZIZ.COM, please be sure to retain the original link when copying!