Here are two ways to do it
- 1. Optical cat is not dialed
This is the case is the optical cat is now linked to the computer or the need for broadband links to the state, we only need to put the cable from the optical cat LAN1 (not necessarily LAN port generally optical cat behind the mark 1/2/3/4 according to the number inserted into the 1 port) linked to the router's WAN port; router's LAN1, 2, 3, 4 port links to the wired devices: computers, TVs, etc.
Then we browser enter the router back label on the URL generally default 192.168.1.1 to enter the router management website, enter the router in the network parameters / routing settings - LAN port parameters set LAN port IP: set to different IP with the optical cat, generally set to 192.168.2.1 can be saved, the router management IP is currently changed to 192.168. 2.1 may need to re-enter the management page
Then we choose to access the Internet for PPPoE dial-up or broadband dial-up, enter the broadband account password below and click Save-Connect-Below the display has been connected to the Internet can be normal, and then you can go to the wireless network inside the WiFi name / WiFi password settings; if the phone or other wireless devices set up, the first WIFI connection to this router, the browser enter 192.168.1.1 to repeat the above Steps can be; if you forget the WiFi password can press and hold the QSS/RESET button on the back of the router for about 10 seconds to let go of the router will be restored to the factory settings, the account secret is on the label on the back of the router; change the button part of the brand for the pinhole need to take the card with the help of a needle similar tool to complete!
- 2. Optical cat has dialed up and want to add a router
This is the case is the optical cat has been able to access the Internet, or the optical cat opened WiFi has been used, want to add a router assigned to other rooms, we need to follow the same method as the above optical cat LAN1 port connected to the router WAN port; router LAN port link wired devices, enter the router in the browser on the back of the label on the web site is generally the default for the 192.168.1.1 to enter the router Management website, enter the router in the network parameters / route settings - LAN port parameters set LAN port IP: set to a different IP with the optical cat, generally set to 192.168.2.1 to save, the router management IP is currently changed to 192.168.2.1 may need to re-enter the management page!
Then we select the Internet access method for Dynamic IP/Automatic IP, click Save-Update, and wait for the IP address 0.0.0.0 to change to normal Internet access.
Then you can go to the wireless network inside the set WiFi name / WiFi password; if the phone or other wireless device settings, first WIFI connection to this router, browser enter 192.168.1.1 repeat the above steps can be; if you forget the WiFi password can be pressed and held on the back of the router's QSS/RESET button for about 10 seconds to let go of the router will restore the factory settings, the account of the secret are in the router! The password is on the label on the back of the router; change the button part of the brand for the pinhole need to use the card pin similar tools to complete the process
